Accueil | Compte | +33 (0)5.34.25.33.66

0 0,00 EUR

BOS Suspension - Alpine A110 shocks

ALpine a110 Shock ABSORBERS

Use : Tourism, Road Track, Rally and Rallycross

Choos your kit

Check out our range of specific shock absorbers for your Alpine A110.

Benefit from all the experience of BOS SUSPENSION acquired at the highest level for more than 20 years with the greatest actors of the motor sport.

Benefit today from all the know-how of Bos Suspension specially developed to live the best experience at the wheel of your Alpine A110.

Tarmac kit : For sport use, rally circuit, asphalt, for leisure or competition.

Whether for pleasure or for competition, discover our hydraulic-monotube shock absorbers specially developed to give you the best sensations at the wheel of your Alpine A110.

Caractéristiques Techniques :

- Shock Absorber : Single Pipe Hydraulic

- Main Piston : 46mm diameter Double Piston .

- Rod : 18mm Diameter (Chromed plated steel).

- Mounting : Eye-to-Eye piggyback

- Technology : Patented CAS "Selective Damping Control" system. (Selective damping according to the load applied to the wheel. Acts mainly at the loss of contact with the ground and at the reception of a jump).

Antifriction aluminum cylinder

Machined aluminum head, guide box and foot

Tarmac kit

Main componants :

- 46mm diameter Double Piston

- 18mm Diameter Rod (Chromed plated steel).

- High speed compression adjustment

- Low speed compression adjustment

- Rebound adjustment

- Hydraulic needle stop

- Preload setting

- Patented CAS System

- Light spring

Adjustment ways :

- 3 ways

Piggyback :

- Yes

Mouting :

- Eye-to-eye

Purpose :

- Sport use on track, circuit for leisure or competition.

Adaptable :

The hydraulic curve, the spring and the settings are optimized according to your expectations (discipline, driving).

Book your personalized test session on the field.

Additional information :

Strong and optimized design: Overhaulable in our workshops or authorized service centers and 100% reconditionable.

Designed, manufactured and assembled in France.

Commercial Documentation :Télécharger - Download

SELECT YOUR ALPINE A110 KIT

Tarmac Kit

Alpine A110

Kit

----------

"Tarmac"

----------

2 x Front shocks

2 x Rear shock

----------

Ref : KV-0004

Learn more

TECHNOLOGIES

Strong & Optimised design

Directly designed, machined, manufactured and assembled in our factory in Toulouse, our shock absorbers are designed to be strong and optimized specifically for your Alpine A110.

For your car we have chosen to select the best materials to meet the specificities and constraints of a daily use and sport of your Alpine A110

This range benefits from all the technology and know-how acquired by Bos Suspension for over 20 years in 2 and 4 wheel sports

High/low speed compression and Rebound adjustment

Our shock absorbers for your Alpine A110 have many adjustment possibilities.

2-way compression settings: Low speed and High speed.

-Rebound adjustment.

-Spring Preload

Find the perfect setting for your preferences and the terrain you're driving on.

Drive faster and harder, with maximum safety, fun and precision, thanks to our range of Alpine A110-specific suspensions.

Patented CAS system

Selective Damping Control.

Put all the power to the ground.

This Bos Suspension patented technology is available on the Alpine A110 shock absorber range.

It corrects the shock absorber hydraulics according to the load applied to the wheels, allowing faster grip recovery and better traction.

This technology is the result of a long work on the dosage of the loads applied to the shock absorber.

Light Spring

Every component of our range is important!

That's why we use high quality, lightweight steel springs with a very high working capacity.

These springs are subjected to an advanced manufacturing process to withstand even higher stresses.

These springs have up to 40% less mass than standard springs, which allows a significant weight saving without affecting the strength and rigidity of the spring.

Hydraulic needle stop

Hydraulic compression stop for the Alpine A110 Kit.

These stops are specially studied and developed by our design office in Toulouse.

Each hydraulic compression stop plays an essential role in the operation of your shock absorbers they allow a precise control of the last centimeters of travel.

Thus, you keep in any situation an optimal operation of your suspensions and you can devote yourself to 100% on the essential: driving!

Hydraulic management

On our Kit for your Alpine A110 benefit from a mastered management of the hydraulics of your shock absorbers.

This management has been developed and adapted specifically for the Alpine A110 to offer you a comfortable and safe dynamic sporty behavior.

The height of the body and the damping gain are adjustable, this allows you to easily adapt your Alpine A110 to all types of driving.

Rebound stop

This rebound stop allows you to use the full potential of your shocks.

This rebound stop allows precise control of the last few centimeters of rebound travel of your shock.

Keep your suspensions running smoothly in any situation and concentrate on your driving.

AMX-1 oil

Each product has its own specificities.

That's why we recommend the use of AMX-1 oil, designed to keep your shock absorber running smoothly and avoid premature wear.

This oil will also reduce friction and parasitic noises, while guaranteeing a homogeneous feeling and a good operation, even when the temperature rises.

This specific oil has been tested all over the world on all the major competitions. It is the result of the experience accumulated by Bos Suspension for over 20 years.